When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 3.4mm thickness. When using 1.0mm wire, it can weld 1.2 6.4mm thickness. GAS (CO2) can use 0.8/ 1.0mm wire. When using 0.8mm wire, it can weld 0.9 4.8mm thickness, when using 1.0mm wire, it can weld 1.2 6.4mm thickness 4. TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.
When using 1.6mm tungsten can weld 0.7 4.8 thickness, using 2.4mm tungsten can weld 1.2 6.4mm thickness 5. MMA FUNCTION - Current 10 170 amp.
Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 3.4mm thickness.Using 4.0mm rods, can weld 3.4mm 8.0mm. Rated input voltage (V) - 110V/220V Frequency (HZ) - 50/60 Rated input power (KW) - MIG: 5.7; TOG: 4.37; MMA: 6.3 Rated input current (A) - MIG: 36.0; TIG: 28.1; MMA: 40.5 Rated input apparent power (KVA) - MIG: 7.8; TIG: 6.21; MMA: 8.9 Welding current adjust range (A) - 10 200 Welding voltage adjust range (V) - 10 26 Duty cycle 40? 10min - 25%, 200A; 60%, 150A; 100% 130A No load voltage (V) - 50V (adjustable) Power factor - MIG: 0.73; TIG: 0.70; MMA: 0.71 Efficiency(%) - =80% Protection class - IP23. 1 x mig torch 1 X electrode holder 1 X earth clamp 1 X gas tube 1 X Tungsten. 1 X 110V to 220V convert plug 1 X graphite wire feed tube: when welding aluminum, please do use it with the mig gun 2 X hose clamps: To hook up your gas to the welder. The gas gives you a much nicer weld then using plain flux core gasless wire 1 X welding brush/ hammer combo: Help to keep your surface clean as you are welding. Deposits build up and you can use this to knock them off. If any other issues arise, please do not hesitate to message, we would be more than happy to assist you. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "motorcar-5" and is located in this country: CA. This item can be shipped to Canada.