4-IN1 LCD Display MIG Welde For Aluminum Gasless Gas MIG TIG ARC Welding Machine
HZXVOGEN MIG Welder 110V 220V 200A Weld Aluminum LED Smart IGBT Inverter MIG Stick TIG Welding Machine Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 3.4mm thickness. When using 1.0mm wire, it can weld 1.2 6.4mm thickness. GAS (CO2) can use 0.8/ 1.0mm wire. When using 0.8mm wire, it can weld 0.9 4.8mm thickness, when using 1.0mm wire, it can weld 1.2 6.4mm thickness. Can use 1.6mm and 2.4mm tungsten. When using 1.6mm tungsten can weld 0.7 4.8 thickness, using 2.4mm tungsten can weld 1.2 6.4mm thickness. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 3.4mm thickness. Using 4.0mm rods, can weld 3.4mm 8.0mm. The ZVS soft switch technology reduces the IGBT switching loss. The efficiency of the machine has a lot of improvement, in the state of MMA, it can reach nearly 80%. Can make the aluminum profile thin plate not deformed, the thick plate has a high degree of fusion, and the weld seam is beautifully formed and the welding point is not black after the porosity welding. Large-screen LCD display, intuitive and detailed understanding of welding parameters, making work easier, MCU control system, responds immediately to any changes. It can be matched with spool welding gun, fast drawing welding, and improving welding efficiency. The Welder uses the average current control mode, and have general protection functions, for example the limited overshoot, the limit of the pulse width, overvoltage, over-current, over-heating and so on.
Those functions obviously improve the stability and security of the welding machine. It will automatically enter the standby state if no load time exceeds three minutes, reducing power consumption. Rated input voltage (V) - 110V/220V Frequency (HZ) - 50/60 Rated input power (KW) - MIG: 5.7; TOG: 4.37; MMA: 6.3 Rated input current (A) - MIG: 36.0; TIG: 28.1; MMA: 40.5 Rated input apparent power (KVA) - MIG: 7.8; TIG: 6.21; MMA: 8.9 Welding current adjust range (A) - 10 200 Welding voltage adjust range (V) - 10 26 Duty cycle 40?
10min - 25%, 200A; 60%, 150A; 100% 130A No load voltage (V) - 50V (adjustable) Power factor - MIG: 0.73; TIG: 0.70; MMA: 0.71 Efficiency(%) - =80% Protection class - IP23. 1 x mig torch 1 x electrode holder 1 x earth clamp 1 x gas tube 1 x tungsten 1 x graphite wire feed tube: when welding aluminum, please do use it with the mig gun 2 x hose clamps: to hook up your gas to the welder. The gas gives you a much nicer weld then using plain flux core gasless wire 1 x welding brush/ hammer combo: help to keep your surface clean as you are welding. Deposits build up and you can use this to knock them off.
If any other issues arise, please do not hesitate to message, we would be more than happy to assist you. Item Processing Time: The processing time for a specific order varies with the product type and stock status. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival.
This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "unitweld2" and is located in this country: CA. This item can be shipped to Canada.
- Bundle Listing: No
- Model: HBM2280
- Multi-process: YES
- Brand: HZXVOGEN
- Rated input voltage: 110V/220V
- Rated input current (A): MIG: 36.0; TIG: 28.1; MMA: 40.5
- Output no-load voltage (V): 50V (adjustable)
- Efficiency: ≥80%
- Welded Material: Aluminum，Iron, stainless steel
- Voltage: 110V,220V
- Feed: Automatic Feed
- Item Type: MIG Flux Cored TIG Arc Stick Combo
- Welding Process: MIG Lift TIG STICK ARC
- Type: MIG aluminum Welder
- Warranty: 2 Years warranty